|
|
|
|
|
|
|
|
|
Programmable Controller Ethernet EM Series Module Comparison Chart |
||||
|
|
|||||
|
|
|
|
|
|
|
|
|
Generation |
3rd: Full power of Tibbo BASIC programmability, support for serial-over-IP via available Tibbo BASIC application |
|
||
|
|
|
EM1000 |
EM1202 |
EM1206 |
|
|
|
Device |
|
|
|
|
|
|
|
||||
|
|
|
||||
|
|
|
||||
|
|
|
||||
|
|
|
||||
|
|
|
||||
|
|
|
|
|
|
|
|
|
Feature Highlight |
2.54mm (0.1") pin pitch-ideal for prototyping. New to Tibbo BASIC? Start your quest with this module! |
Stacked design minimizes footprint, device width close to that of a standard RJ45 jack. |
Member of x20x family, with the RJ203 jack/magnetics. Combined footprint only 34.5x19mm. |
|
|
Can work as a serial-to-IP device? |
YES, through the use of available serial-over IP Tibbo Basic application |
|
|||
|
Tibbo-BASIC programmable? |
Yes, with full power of Tibbo Basic, its objects, and the libraries |
|
|||
|
|
|
|
|
|
|
|
|
Ethernet Port |
YES, 100/10 BaseT |
|
||
|
Built-in Magnetics |
NO |
|
|||
|
Wi-Fi Port |
EXTERNAL, requires the GA1000 Wi-Fi add-on module |
|
|||
|
Serial Port(s) |
4 |
|
|||
|
I/O Lines |
Up to 53 |
Up to 32 |
Up to 17 |
|
|
|
|
|
|
|
|
|
|
|
Flash Memory |
512KB or 1024KB, for TiOS firmware, compiled Tibbo Basic application and its Data |
|
||
|
Flash Disk |
YES, can take all free space in the flash memory (space not already occupied by TiOS firmware and Tibbo Basic application) |
|
|||
|
EEPROM |
2048 bytes, 2042 bytes available to store Tibbo Basic application data |
|
|||
|
Firmware Upgrades |
Yes, through a serial port or network |
|
|||
|
|
|
|
|
|
|
|
|
RTC |
YES, with internal or external backup power source |
NO |
YES, with external backup power source |
|
|
Supports LCD |
YES, supports several models of displays, the list will be expanded in the future |
|
|||
|
Supports Keypad |
YES, up to 64 keys depending on the availability of I?O lines and keypad configuration |
|
|||
|
Buzzer Control Output |
YES, programmable square wave output |
|
|||
|
System (MD) Button Line |
YES |
|
|||
|
Status LED Control Lines |
2, for green and red status LEDs |
|
|||
|
Ethernet LED Control Lines |
2, for link and speed mode indication |
|
|||
|
PLL (Speed) Control |
YES, through hardware (jumper) or software |
YES, through software only |
|
||
|
Reliable Onboard Reset |
YES, onboard power-up, brown-out detection, and watchdog circuit |
|
|||
|
|
|
|
|
|
|
|
|
Supply Volatges (Nominal) |
3.3V, I/O lines are 5V-tolerant |
|
||
|
Current Consumption (max.) |
230mA, with PLL on and 100BaseT link |
|
|||
|
Dimensions |
38.4x28.4x5.5mm |
19.1x17.1x14.6mm |
33.2x18.1x5.5mm |
|
|
|
Potted (sealed) Enclosure |
NO |
|
|||
|
|
|
|
|
|
|
|
|
Data Sheet |
|
|||
|
For More details visit our Tibbo's site |
|
||||
|
Manual |
|
||||
