EM202 Embedded Ethernet Module

EM202 Embedded Ethernet Module (RJ45 form factor) The EM202 is a board-level Ethernet Module in the RJ45 form factor measuring only 32x19x16 mm, the EM202 adds a 100BaseT ethernetport to any serial device. The EM202 is highly integrated and requires no external components, as standard Ethernet magnetics and RJ45 connector are built into the Module. Module's serial port is of TLL type and interfaces directly to the serial port pins of UARTs, microprocessors,and microcontrollers.

EM200 Embedded Ethernet Module
("chip" form factor)

The EM200 is a board-level Ethernet Module in the CHIP form factor. Measuring only 32.1x18x7.3 mm, the EM200 adds a 100BaseT Ethernet port to any serial deviceThe EM200 is highly integrated and requires external components as standard Ethernet magnetics and RJ45 connector. Module's serial port is of TLL type and interfaces directly to the serial port pins of UARTs, microprocessors,and microcontrollers.

EM100 Embedded Ethernet Module
("chip" form factor))

The EM100 is an Ethernet Module for onboard installation. Measuring only 46x28x13 mm.The EM100 adds a 10BaseT Ethernet port to any serial device and is compact enough to fit practically on any PCB. The Module is highly integrated and requires only one external component- a RJ45 connector. The EM100 features a TTL serial port and interfaces directly to the serial port pins of UARTs, microprocessors,and microcontrollers. Standard Magnetics included.

EM120 Embedded Ethernet Module
("chip" form factor)

The EM120 is an Ethernet Module for onboard installation. Measuring only 35x27x9.1mm.The EM120 adds a 10BaseT Ethernet port to any serial device and is compact enough (smaller in size then EM100) to fit practically on any PCB. The Module is highly integrated and requires only one external component- a RJ45 connector. The EM100 features a TTL serial port and interfaces directly to the serial port pins of UARTs, microprocessors, and microcontrollers. Magnetics not built in.